You have no items in your shopping cart.
➤ % WAREHOUSE CLEARANCE ➤ We prepare for the big move and clean up our stock. ➤ UP TO 70% OFF - EVERYTHING HAS TO GO OUT!
Sea to Summit COMFORT PLUS INSULATED MAT REGULAR
Insulating comfortable sleeping mat.

Insulating comfortable sleeping mat.
Product description for Sea to Summit COMFORT PLUS INSULATED MAT REGULAR from our collection of Outdoor Sports & Fashion:
The Comfort Plus range by SEA TO SUMMIT is one of the most sensitive and comfortable sleeping pads available.
The Comfort Plus series by SEA TO SUMMIT are formed using Dual Layer construction - two independent, offset high resolution layers. The higher resolution cell matrices allow greater sensitivity by distributing your body weight and shape over more small cells. The air sprung cells on the top and bottom layers are offset to give more uniform insulation, preventing cold spots.
The mat’s firmness can be more finely tuned with Dual Layer construction. The bottom layer is inflated firm for height, then the top layer inflated to the desired comfort level. If either layer is punctured, the other layer will provide redundancy, keeping you off the ground and sleeping uninterrupted.
The Comfort Plus by SEA TO SUMMIT is available in Small, Regular and Large sizes (tapered shape), Regular Rectangular and Large Rectangular sizes, all of which are available with or without insulation. The insulation is provided due to the Dual-layer construction with the Exkin Platinum® and Thermolite® technology.
Comfort Plus Insulated Regular:
- Number of Air Sprung Cells™: 548
- Length x width x height: 183 x 55 x 6.3 cm
- Rolled size: ø 12 x 23 cm
- Weight: 725 g
Comfort Plus Insulated Regular Rectangular:
- Number of Air Sprung Cells™: 596
- Length x width x height: 183 x 56 x 6.3 cm
- Rolled size: ø 12 x 23 cm
- Weight: 825 g
Air Sprung Cells™:
The air sprung cells are the core technology of the Sleeping Mat range by SEA TO SUMMIT and are the reason why you will sleep better on a SEA TO SUMMIT sleeping mats. Instead of the typical baffled construction, SEA TO SUMMIT sleeping mats are constructed using a dot-weld pattern to create a high surface-area matrix of interconnected chambers called Air Sprung Cells™.
Air Sprung Cells™ operate in the same way as a pocket spring mattress, as each cell deforms independently the mattress conforms to your body shape which feels softer and more comfortable with more body contact area and even dispersion of pressure.
Extrusion TPU Lamination:
The TPU coating is applied through a process unique to the medical and aeronautical industries. Extrusion lamination is more durable, consistent and enables SEA TO SUMMIT to use their own TPU recipe. It is vastly superior to roll-to-roll lamination, which is used in all other outdoor products at present and can suffer from delamination issues.
SEA TO SUMMIT has also introduced an anti-microbial treatment into the TPU to prevent mould or fungal growth inside the mattress. While SEA TO SUMMIT does have two superb pump options, the Air stream or Jet stream, the anti-microbial treatment means you can go ultra-light and inflate with your breath.
Comfort plus series - Dual Layer Design:
The Comfort Light Range has a double-layer (double-layer) construction in the torso for maximum comfort and insulation and a single-layer (monolayer) construction in the head and leg regions where less pressure is exerted on the mat.
The dual-layer (double-layer) construction consists of two independent, high-resolution layers, which have a greater sensitivity to get and distribute body weight and shape over several cells. The two layers are displaced from each other and offer unified insulation and cushioning. The dual-layer construction also provides built-in redundancy. If one layer of the mat is damaged, you can still sleep on the other layer.
Exkin Platinum®:
Exkin Platinum® is a very lightweight, quiet non-woven fabric that has a thin metalised layer applied to the surface. Exkin Platinum® thermal technology reflects radiant heat loss back to the user.
Thermolite®:
Thermolite® is designed for ultimate performance, is made from specially engineered fibers to achieve a high CLO value with low weight. THERMOLITE® HL-1 high loft insulation is a fiberfill constructed with a unique 3D crimp of hollow-core and solid fibers, which provide excellent lightweight warmth with superior durability. The THERMOLITE® insulation lofts up inside the Air Sprung Cells™ to prevent convective heat loss from your warm body to the cold ground.
Exkin Platinum® and THERMOLITE® are combined to great effect in each of the Insulated versions of our mats.
Material specifications for Sea to Summit COMFORT PLUS INSULATED MAT REGULAR
- Outer fabric: 40D Ripstop Nylon
- Inner fabric: Air Sprung Cell™, 20D Nylon mid-layer
- Insulating: Exkin Platinum® and Thermolite®

